Page 3 of 3

Re: LED Bike Light Order

Posted: Wed Oct 17, 2012 9:31 am
by jj12
thanks again andrew for doing this. if possible i would like another, for julie if you can but if not no worries.

Re: LED Bike Light Order

Posted: Wed Oct 17, 2012 6:54 pm
by Andrew
No problem, I got you for another set John.

Anybody who hasn't paid me please remmeber cash or a cheque Friday.

Re: LED Bike Light Order

Posted: Thu Oct 18, 2012 12:07 pm
by Andrew
Mark Shepard has done a test and the full power burn time for the 1200s on his set is between 1:45 and 1:50 which should be fine for TSC rides but a problem for mountain biking unless you use the half power setting when you canand turn lights off when stopped. The 900s run well over two hours. I will be brining in extra battery packs and they will cost about $30-35 a pack. Let me know if you want one. No shipments this week :(

Re: LED Bike Light Order

Posted: Thu Oct 25, 2012 10:52 am
by Andrew
Another 20 sets are in transit and expect that they will arrive by next Friday. This is a mix of 900-1200 with a diffuse pattern and the 1200s with the long beam that you have seen on the team.

Re: LED Bike Light Order

Posted: Tue Nov 06, 2012 5:39 pm
by Cameron Paul
Hi Andrew,

900 lumenx2 and 1200 lumenx2 and one helmate mount.
I was wondering how/when to pay and pick up the lights.
Thanks a lot, Cameron

Re: LED Bike Light Order

Posted: Wed Nov 07, 2012 3:35 pm
by Andrew
Really need you guys to come and get lights, please PM me (Andrew) to get you lights!

Re: LED Bike Light Order

Posted: Tue Nov 13, 2012 7:58 pm
by arose
Hi Andrew, I've been out of touch so not sure whether or not you still have one of the 900 lumen sets available. I would like one if you do and I can drop by tomorrow to pay and pick up. Where & when though? I work at UVic from 8:30am-4:30pm so it would have to be outside of that time. Thanks so much! Allison

Re: LED Bike Light Order

Posted: Sun Nov 18, 2012 8:59 pm
by Cameron Paul
Hi Andrew,

I have recieved the lights and on one of the pair, the rubber button is missing. Therefore moisture can get inside the light. I was wondering if it's possible to get another rubber button? or some other solution. Thanks, Cameron p.

Re: LED Bike Light Order

Posted: Sun Nov 18, 2012 10:40 pm
by Andrew
We will figure it out Cameron. I sent you a PM. Andrew

Re: LED Bike Light Order

Posted: Fri Nov 23, 2012 9:16 am
by Andrew
I have 25 sets of lights, another ten or so coming in.
They are going like hotcakes now so PM me and get them or you will miss out!
You can also email me at andrewattwell@hotmail.com
Thanks,
Andrew