Death in the family/Wanted--Cross/Winter bike

post all stuff wanted and for sale here

Moderator: mfarnham

Locked
mfarnham
Posts: 884
Joined: Sat Dec 08, 2012 9:56 am

Death in the family/Wanted--Cross/Winter bike

Post by mfarnham »

Memorial services for my orange Kona Jake The Snake will be held shortly (premature demise due to cracked frame). I'm thinking a quasi-Viking burial (set it on fire and point it down Ash Hill) might be appropriate.

In the meantime, cross season is upon us and I don't have a bike. If anyone's looking to upgrade or clear garage space (Dave Spiers?), pm me.

I'm 6'1". If I end up spending over $1500 I'll be in big big trouble at home.

*sniff*

Martin
Fozzy
Posts: 499
Joined: Fri Aug 31, 2012 6:26 pm

Re: Death in the family/Wanted--Cross/Winter bike

Post by Fozzy »

Martin!!

Get yourself down to Broad Street Bikes.
They have a few Focus Mares cross bikes in the sale.
I think they have a large for $1250
stevierooks
Posts: 146
Joined: Sat Nov 03, 2012 6:37 am

Re: Death in the family/Wanted--Cross/Winter bike

Post by stevierooks »

last time I had a cracked frame, I took it back to the bike shop where I got it - 8 years after - and they said "No problem. Most bike companies will replace a cracked frame for free" I had wiped out hard and snapped a back stay. Sure enough, Rocky Mountain sent a new frame and the guys charged me about $100 to switch over my parts.

A new Focus would be sweet though. I was just in there looking at them. Shawn is riding one of the demos and loves it!

Rooks
Dave L
Posts: 50
Joined: Thu Mar 08, 2012 8:52 am

Re: Death in the family/Wanted--Cross/Winter bike

Post by Dave L »

If the Focus doesn't take your fancy, there is a 61cm Kona Jake at Russ Hays for $1100.

Dave
AlW
Posts: 386
Joined: Wed Apr 08, 2009 7:39 am

Re: Death in the family/Wanted--Cross/Winter bike

Post by AlW »

I have a friend who had a similar issue (assuming it is an aluminium frame)

He had it repaired by Dave at Gas Gas Pacific (gasgaspacific@telus.net) in Metchosin.

Cost about $50 which would definitely keep you out of trouble at home.

http://www.gasgaspacific.com/daveswelding/
#24
mfarnham
Posts: 884
Joined: Sat Dec 08, 2012 9:56 am

Re: Death in the family/Wanted--Cross/Winter bike

Post by mfarnham »

Thanks all, for the advice. It wasn't covered under warranty, as it turns out. I'm going to look into the welding option, though. I like the idea of a Frankenbike.

Martin
User avatar
John D
Posts: 1101
Joined: Tue Aug 10, 2010 8:50 pm

Re: Death in the family/Wanted--Cross/Winter bike

Post by John D »

>I like the idea of a Frankenbike.

With all the spare parts we have collectively, I'm sure we ould build one of these:

Image
"Talk - Action = Zero" - Joe Keithley
User avatar
Lister Farrar
Posts: 3093
Joined: Tue Nov 06, 2007 3:19 pm

Re: Death in the family/Wanted--Cross/Winter bike

Post by Lister Farrar »

I second the Dave Fair in Metchosin suggestion. He fixed a couple frames for me: split headthbe and broken dropout. Also recommended by Fairfield bikes and other shops in town.
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
mfarnham
Posts: 884
Joined: Sat Dec 08, 2012 9:56 am

Re: Death in the family/Wanted--Cross/Winter bike

Post by mfarnham »

IT'S BAAAAACK!!! The orange bike lives to ride another day.

Dave Fair in Metchosin was a great call. He's super nice, charged me so little I felt guilty, and entertained me with a tour of the Victoria Motorcycle Club property and his Gas Gas trials bike shop (which abuts the VMC property). The folks at Russ Hays looked at the weld and said, "Yep, that guy obviously knows what he's doing."

Great call Al. Thanks!

Martin
Locked