Wanted 45 or 52 tooth chain ring, w ramps and pins 130mm

post all stuff wanted and for sale here

Moderator: mfarnham

Locked
User avatar
Lister Farrar
Posts: 3093
Joined: Tue Nov 06, 2007 3:19 pm

Wanted 45 or 52 tooth chain ring, w ramps and pins 130mm

Post by Lister Farrar »

Alex had a nasty chain jam at walla walla with an old school unramped 45 she is using to get the junior gears with a 12 cassette. It's the conventional road bolt circle ( not compact) so likely very rare. But trying anyway. :)
Last edited by Lister Farrar on Wed May 02, 2012 12:30 pm, edited 1 time in total.
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
bikehart
Posts: 382
Joined: Thu Mar 18, 2010 1:01 pm

Re: Wanted 45 tooth chain ring, w ramps and pins 130mm

Post by bikehart »

Blackspire has 42, 44 and 46 tooth with ramps and pins online...
http://www.blackspire.com/SuperPro-Cycl ... Chainrings

They are in Delta so it might be worth giving them a call.

Hugh
#54
User avatar
Lister Farrar
Posts: 3093
Joined: Tue Nov 06, 2007 3:19 pm

Re: Wanted 45 tooth chain ring, w ramps and pins 130mm

Post by Lister Farrar »

Thanks Hugh. Good source to know about.

But I'm pretty sure she needs the 45t to make the roll-out rule.

L
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
User avatar
Lister Farrar
Posts: 3093
Joined: Tue Nov 06, 2007 3:19 pm

Re: Wanted 45 tooth chain ring, w ramps and pins 130mm

Post by Lister Farrar »

Called blackspire, and though very nice there, they don't make a ramped 45 and don't plan to. Didn't bite when i suggested custom ones. No ideas where else to get. Back to the drawing board.
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
User avatar
Lister Farrar
Posts: 3093
Joined: Tue Nov 06, 2007 3:19 pm

Re: Wanted 45 or 52 tooth chain ring, w ramps and pins 130mm

Post by Lister Farrar »

Giving up on a 45, how about a 52 with ramps and pins?

Hers is a 53 which puts her over the limit, or well under it on a 15 t cog. Maybe a trade if 1 tooth doens't matter to you?
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
Locked