THIS IS NOT A DISCUSSION OF WHICH IS BETTER.
I'm wondering if anyone knows what the longest crank you can get away with at Burnaby is on a proper track bike. I know most people seem to run 165, but there's some 170's at great prices used, but I'm wondering if those will hit on the bankings. I'm not wondering which is better. At all.Just which will work.
Thanks,
David
Track Crank Length
Moderator: mfarnham
Track Crank Length
I've got an obnoxious helmet. It's green.
-
- Posts: 33
- Joined: Tue Aug 04, 2009 10:42 pm
Re: Track Crank Length
170mm is not going to hit the bankings.
- Lister Farrar
- Posts: 3093
- Joined: Tue Nov 06, 2007 3:19 pm
Re: Track Crank Length
As long as the bottom bracket height is a normal track height, which the argon should be. Ask emile, since he's not selling cranks, he doesn't have a conflict and should know the characteristics of his bike. I have 170's on my track bike, but I also specified that when I ordered it. If he doesn't know, ask him to measure and we can compare the height to my bike which doesn't hit.
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
- Lister Farrar
- Posts: 3093
- Joined: Tue Nov 06, 2007 3:19 pm
Re: Track Crank Length
lolJosh.E wrote:170's are totally better
Lister
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4
"We're jammin', jammin',
And I hope you like jammin', too."
(Bob Marley)
https://www.youtube.com/watch?v=2QdwYY9rZL4